AirLink Communications Raven X HSDPA Uživatelská příručka stáhnout pdf (Strana 12)

Raven X HSDPA for Cingular - User Guide, version 2.33 7

Activation of the Raven X

FIGURE 5. Inserting the SIM tray

Replace the cover to prevent dust or other unwanted particles from entering the Raven X. Once the

cover is replaced, the installation is complete.

Setting the APN with Wireless Ace

The APN (Access Point Name) is the way your modem knows how it will be communicating with

the network. The APN allows custom IP addressing and tailoring your company's wireless IP solu

tion to meet the security and IP addressing requirements of your applications.

Most Cingular accounts use the default addressing solution of Private or Public IP addresses sup-

plied by the Internet and Proxy APNs. Only if you have a Static or Custom IP address should you

need to configure a custom APNs.

To configure the APN, you need to use Wireless Ace. If you haven't installed Wireless Ace refer to

the "software required" section on page 1 of this guide.

A. Click on Connect.

Replace the SIM slot cover.

Powere on your Raven X and connect directly to the Ethernet or serial port on your computer.

Start Wireless Ace and connect to your modem.

Start > All Programs > AirLink Communications > Wireless Ace 3G > Wireless Ace 3G

If your computer is connected to your modem with an Ethernet cable:

B. Select UDP or TCP.

C. Type in the modem’s local IP (default is 192.168.13.31).

D. Type in the modem’s password (default 12345).

If your computer is connected to your modem with a serial cable:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 106 107

Žádné komentáře

AirLink Communications Raven X HSDPA Uživatelská příručka Strana 12